If you are wondering, Masonry simply involves various types of structures in which single brick units are laid out and joined with the help of mortar. Masonry contractors very commonly makes use of concrete and stone blocks to make patios.

Masonry is one of the most popular techniques of construction throughout the globe. After all, it has many different advantages. However, it is important to note that like all other methods, masonry may also have its limitations.

In this article, we put together all the benefits and disadvantages of masonry in the world of construction. So, read this article fully, in order to expand your knowledge.

What are the advantages?

The advantages that we are going to list below apply to all types of masonry construction projects. They do not just apply to a single one, rather are more general. These include:

Non-combustible

Perhaps the biggest advantage here is that the materials used in Masonry are non-combustible. Now this is incredibly useful because it prevents the fire hazards that can burn down entire properties. This is one of the main reasons why masonry is involved in the construction of outdoor fireplaces and indoor ones too!

Elegant

Another common benefit of masonry in construction is the elegance factor. For instance, slabs of concrete or brick blocks can add a lot of elegance in a house. Especially if you are planning to construct an outdoor patio, this is going to totally transform the look of your house.

Longer life spans

Another notable benefit is the lifespan of masonry. Typically, masonry tends to have a longer lifespan in comparison to other building types. So, after your masonry project is over, your structure will stay put for a much longer period of time.

What are the limitations?

Now, let us discuss some limitations.

Heavy materials

Perhaps the biggest limitation or disadvantage of masonry is that it involves the use of some very heavy materials. At times, moving this these heavy materials is no less than hassle. For this reason, cranes are used very commonly in construction sites.

These machines are responsible for transfer the load from one spot to the other, in a safe manner. After all, stone blocks and concrete blocks can be incredibly heavy. If not handled properly, they can present a life hazard.

Requires time and planning

Another important limitation is that masonry requires plenty of planning and time. You cannot just think about starting a masonry project today and get it done tomorrow. Rather, you will have to do thorough planning, with good amount of forethought.

This is the only way to get done with a masonry project successfully. Otherwise, you will simply end up in a loss.

Depends on weather conditions

Another disadvantage is that of weather conditions. In the case of a rain or a thunderstorm, a masonry project simply cannot continue. At times, rain and similar weather conditions may actually ruin the on-going masonry project. And you would not certainly want that now, do you?

Again, planning comes into consideration here. By checking the weather forecasts beforehand, you can plan the best time to start your masonry project.

Conclusion

All the above-mentioned benefits and limitations/disadvantages should be enough to give you a clear picture of masonry projects. So, before you reach out to contractors for your masonry projects, make sure that you have considered these advantages/disadvantages.

Also make sure that you are getting specialized services. For instance, for stone veneer work, reach out to the best local patio builders Long Island. Similarly, for concrete work, choose a different contractor that specializes in that type of work. This will give you the best value.